Four Highlights
Easy Installation
Compatible with EV
Intelligent Recognition
Five Safety
Easy Installation
for Safety and Convenience
Easy Installation
Plug and Play
OBD Interface
A dedicated interface for plug and play Easy installation without disassembly ensures a stable connection
disassembly for Installation With
Complex wiring
Fuse box interface
Requires disassembly for installation. Complex wiring may result in disconnection
Make Parking Monitoring Possible for Electric Vehicle
By installing the hardwire kit through the OBD interface, enable parking monitoring for electric vehicle
Intelligent Recognition of Vehicle Status
Automatically Enables 24h Parking Monitoring
After parking, the dash cam will automatically turn on the Parking mode and record in case of any abnormal collisions.
24H parking monitoring
Power management technology
Time-lapse recording
Five Safety Protection Features Protect the Dash Cam and Vehicle Battery
Low Voltage Protection
Automatically cuts off power for the dash cam to intelligently protect the battery once the battery voltage is lower than the low voltage protection threshold set
Overcurrent Protection
Automatically distributes current to prevent high currents from damaging the dash cam
Short-Circuit Protection
Automatically cuts off power to protect the dash cam when the output port is short-circuited, and automatically restores power supply after the fault is removed
Overload Protection
Automatically cuts off power to protect the dash cam when the current exceeds the set threshold
Reverse Connection Protection
Automatically cuts off power to protect the dash cam when the wiring is connected incorrectly, and automatically restores power supply after the fault is removed
IPS Management
Intelligently Protect Vehicle Batteries
The built-in PS management system monitors the vehicle battery voltage at all times and automatically cuts of the power for the dash cam when the voltage is lower than the threshold set in the DDPAI app.
Battery management visualization technology
DDPAI OBD كيبل تايب سي موصل للكاميرا
وصف المنتج:
- التعرف الذكي على حالة السيارة
يتيح تلقائيا مراقبة وقوف السيارات على مدار 24 ساعة بعد وقوف السيارات، ستقوم الكاميرا الدفاعية تلقائيا بتشغيل وضع وقوف السيارات وسجل في حالة حدوث أي تصادمات غير طبيعية.
- إدارة IPS قم بحماية بطارية السيارة
يراقب نظام إدارة PS المدمج جهد بطارية السيارة في جميع الأوقات ويقطع تلقائيا الطاقة عندما يكون الجهد أقل من العتبة المحددة في DDPAl
التوافق : MINI5, Z40, Z50, N3 pro
طول الكيبل: 3000mm
ادخال:12V
اخراج: 5V 2A
